Slips, Trips & Wet-Floor Control for Cleaners Course

CCMTec Focused Skills Course

Slips, Trips & Wet-Floor Control for Cleaners

Practical training on keeping people safe while you clean. Check the area, set up a proper wet-work zone, leave floors less slippery, control trip hazards from your own kit and know exactly what to do if someone falls.

6 practical modules Online and self-paced Scenario-based assessment Certificate on passing

Why it matters

You create the hazard and walk on it all day

The Health and Safety Executive (HSE) identifies slips and trips as one of the most common causes of injury at work, and wet floors are a frequent cause. Cleaners are in an unusual position: the job removes slip hazards, but it also creates them.

This course teaches the practical routine that keeps staff, visitors and you safe while floors are being cleaned. It covers when to clean, how to set out signs and a dry walkway, how much water to use, how to keep your own kit from becoming a trip hazard and what to do in the minutes after a fall.

Built around the job, not theory

Every module teaches what to do on site, in order, with the decisions you will actually face and a real-world scenario. The legal background is kept to what a cleaner needs to know about their own duties and their employer's.

The course does not replace the site risk assessment, your employer's procedures or supervision.

Who this course is for

  • Cleaners working in offices, schools, shops, care settings and homes
  • New starters who need slip and trip training before working alone
  • Cleaning supervisors and team leaders
  • Self-employed cleaners who want to show clients they work safely
  • Employers who need evidence of slip and trip training for staff

What this course does not cover

  • Writing a full site risk assessment
  • Floor slip-resistance testing or surveys
  • Working at height, ladders or steps
  • First aid training
  • Floor sealing, stripping or specialist floor care
  • Legal advice on claims or liability

Course structure

Six focused modules

Each module follows the order of a real job, from checking the area to dealing with a fall.

Module 1

Why Slips and Trips Happen

How people slip and trip, why cleaners both cause and suffer them, and who is responsible for what.

Module 2

Assessing the Area Before You Start

Walking the route, reading the floor, footfall and timing, lighting, steps and slopes, and choosing when to clean.

Module 3

Setting Up a Safe Wet-Work Area

Sign placement, barriers, closing sections, keeping a dry walkway, cleaning in halves and removing signs at the right time.

Module 4

Cleaning Methods That Reduce Slip Risk

Mop wetness, dilution and residue, drying, mop or machine, and dealing with spills quickly and properly.

Module 5

Trip Hazards From Your Own Work

Cables, buckets, trolleys and hoses, tidy working, footwear and how you move on wet and uneven floors.

Module 6

When Someone Falls

What to do first, getting help, making the area safe, recording the facts and when RIDDOR reporting applies.

More than putting a sign down

What the course teaches in practice

Plan the job

Walk the area first, read the floor and footfall, and pick a time and method that leaves people a safe route.

Control the work

Set signs where people approach from, clean in sections, use less water and keep your own kit out of walkways.

Respond properly

Deal with spills straight away, and if someone falls, help them, make the area safe and record the facts.

What learners will be able to do

  • Explain how slips and trips happen and the duties of cleaners, employers and self-employed cleaners
  • Assess an area before cleaning and choose the safest time and method
  • Set up a wet-work area with the right signs, barriers and dry walkway
  • Clean floors with correct dilution and controlled wetness so they dry faster
  • Control trip hazards from equipment, cables, trolleys and work layout
  • Respond correctly to a fall and know when an incident must be reported under RIDDOR

A sign is not a defence on its own

A wet floor sign warns people. It does not make the floor safe. The professional standard is to plan the work so people are kept off wet floors wherever possible, and use signs as one part of that, not the whole answer.

Learners are taught to stop and report when a site cannot be cleaned safely as planned.

Applied assessment

Ten realistic decisions

The final assessment contains ten scenario-based questions. Each one describes a real situation on site, such as a busy entrance on a wet day, a spill mid-shift or a fall, and asks what you would do.

The pass mark is 70%, which is seven correct answers out of ten. Feedback is provided after submission and you can retake the assessment.

Certificate

Issued after passing

Learners who achieve the pass mark can access a personalised course certificate showing their name, completion date, assessment score, course version and unique CCMTec reference.

The course supports continuing professional development and is suitable for inclusion in a CPD portfolio. It is not CPD-accredited.

Course access

Focused training without filler

Study online at your own pace. Work through all six modules, then complete the ten-question assessment when you are ready. A score of 70% or higher unlocks the course certificate.

This is an online course. No physical product will be shipped and there are no downloadable handouts.

£25

One-off payment for course access, assessment and certificate.

Common questions

Frequently asked questions

Is this course suitable for beginners?

Yes. No previous training is needed. It is also a useful refresher for experienced cleaners and supervisors.

How long does it take?

Most learners finish the six modules and the assessment in two to three hours. You can stop and come back at any time.

Can I buy it for my staff?

Yes. If you buy more than one place, we will email you to collect each learner's name and email so each person gets their own access and certificate.

Does this replace a risk assessment?

No. The course teaches you how to work safely and what to look for. It does not replace the site risk assessment, your employer's procedures or supervision.

Is the course CPD-accredited?

No. The course supports continuing professional development and may be included in a learner's CPD portfolio, but CCMTec does not claim accreditation or certification by an external CPD body.

Course code STW · Version 1.0 · Published October 2026 · Last reviewed October 2026 · Sources: Health and Safety at Work etc. Act 1974 (sections 2, 3 and 7), Workplace (Health, Safety and Welfare) Regulations 1992 (regulation 12), Management of Health and Safety at Work Regulations 1999, RIDDOR 2013, HSE slips and trips guidance · Course terms & disclaimer

Professional-use disclaimer

This course provides general vocational training for cleaners. It does not constitute site-specific health and safety advice, legal advice, a risk assessment or confirmation that a learner is competent to carry out every task described. It does not replace employer procedures, site rules, product labels, suitable supervision or applicable legal duties. Learners and employers remain responsible for assessing each site and task, working within the limits of their training and insurance, and stopping or escalating work when conditions cannot be safely controlled. Nothing in this disclaimer excludes or limits liability where doing so would be unlawful.